Scroll Down to see More!!
Wizard Product Development...
PRODUCT DEVELOPMENT AT THE PROBLEM SOLVER
OFFER AN EXCITING GAS CYLINDER REJUVENATION!
Chair
Stuck???? Problem Solver can fix that!
Won't "lift" ???? Problem Solver can fix that!
Outta Gas???? Problem Solver can fix that!
PUT NEW LIFE BACK INTO OLD CHAIRS! Think Green!!!..keep
them out of the landfill, while holding down equipment costs!
We offer a new line of
replacement gas cylinders from most major manufacturers:
Herman Miller®, Steelcase, Haworth, Hon, Knoll, Allsteel,
Global, United Chair, SC Leap Chairs, Aeron Chair Cylinders for A, B and C, Suspa Cylinders
Globe Chair, Teknion and many more...
New Gas
cylinders are not always available for purchase on many chair models.
WizBangOut
Gaslift Removal Tool
A new tool developed to
remove a gaslift cylinder from
office chair base or from the swivel/tilt
mechanism.
This WizBangOut tool will fit all standard office chairs.
It is constructed of hard steel and built
to take abuse.
Install the
WizBangOut gaslift removal tool on the top part of the lift, as close as
possible to the control. (If chair is equipped with a telescopic cover, it can
be taped
to the five star base so it is out of the way.)
Apply lifting force to either
the lift or to one of the legs at the five star
base with
one hand. With the hammer in the other hand, give the gaslift
removal tool
several
solid hits on the flat part.
Always use safety glasses!
This new WizBangOut
gaslift removal tool has long been needed to
provide
easier and simpler disassembly for standard office chairs.
$49.95
includes shipping to anywhere in the continental US
Terms of Sale:
Payment with your Purchase Order.
Checks, credit cards accepted. Payable to: Problem Solver FOB Warehouse
WizBangOut
Gaslift Removal Tool
instructions
Tools Needed:
1) Hammer
(16 oz. or larger)
2) Safety Glasses (recommended)
3) Masking Tape or similar
|
Instructions:
1) Extend chair to
the highest
seating position, see fig.1.
2) Turn chair to an upside down
position, see fig. 2.
3) Install the WizBangOut gaslift
removal tool on the top part of the
lift, as close as possible to the
control, see fig.3.
(If chair is equipped with a
telescopic, it can be taped to the
five star base, so it is out of the
way.)
4) Apply lifting force to either the lift
or to one of the legs at the five star
base, with one hand. With the
hammer in the other hand, give
the gaslift removal tool several
solid hits, on the flat
part,
see fig.4.
Always use safety glasses. |
 |
|
 |
 |
If gaslift does not
separate from control, apply
WD-40 where lift is embedded in control. Wait
approximately 20 minutes and repeat step 4
PRODUCT LIABILITY AND
DISCLAIMER:
No warranty of any kind, expressed or implied, is made respecting the
safety of the product sold. Buyer assumes all risk and liability resulting
from use of said products.
