Herman Miller Action Office


		For Total Solutions

Herman Miller Action Office Parts II
Call for Current Pricing
to view dims click on any image

Ceiling Power Entry 3 Circuit	Panel Base Power Kit,3-circuit
This power entry connects a ceiling electrical supply to the base of a powered panel at the end of a panel or at 3-or 4-way 90° connector. It distributes up to 3 20 amp circuits and holds up to a 6 25-pair cables. The power entry has a 10-1/2' pole, which can be field cut to the appropriate length; ceiling and base trim, rigid and flexible conduit; a conduit connector; and a factory-installs electrical harness. The rigid conduit encloses electrical wires and provides metal separating from voice/data cables/ Part # A0331	This Kit converts a nonpowered panel to a powered panel and distributes up to a 3 20-amp circuits. It includes 2 cable management side covers, a cable connection, and an electrical harness with base plate assembly. Part # A0355
Panel Base Power Adapter ,3 Circuit	Harness Extender,3 circuit
This power adapter converts a panel equipped with an enclosed cable management raceway to a 3-way circuit powered panel. It includes an electrical harness and a cable connector. Part # A0356	This harness extender converts a 2-,2-way 90 connector spacer or panel hinge with an enclosed cable management raceway to a 3-circuit powered connector. Part # A0345
Connector Power Kit, 3 Circuit	Hinge Connector Power Kit, 3 circuit
This kit bridges power between panels connected by a 2-3- or 4-way 90 connector or spacer. It includes 1 trim cover set. Part #A0348	This kit bridges power between powered panels connected by a panel hinge and includes 1 trim cover set. Part #A0349
Panel Conversion Base Kit	Connector Conversion Base Kit
This kit provides 4-circuit energy capability and expanded cable management capacity to an Action Office Series 2 UL Listed pane;. It includes cable management side covers, a base plate, a base weldment, and adjustable glides. Part # A1910	This kit attaches to an Action Office Series 1 connector to provide an enclosed cable management raceway between 2 converted Series 1 panels. The 90 kits includes a support post assembly and connecting hardware to match the specified connector, 2-and 3-way 90 2-and 3-way 120 and spacer kits include trim covers. Part # A1920
Conversion Dowel kit	Receptacle,3-Circuit
This kit includes 50 wood dowels and an 8 ounce bottle of wood glue to plug existing holes in the panel base, The panel base can then be redrilled for a panel conversion base kit Part # A1925	This receptacle locks into the base of a powered panel. Part # A0311
Electrical Distributor, 4- Outlet	Panel Conversion Tool Kit
This electrical distributor attaches to an Action Office or Prospects panel suspended cable management trough, Ethospace cable management trough, or the stretcher on an Arrio work surface. The electrical distributor provides additional receptacles a t work surface height and has 4 standard, 3 prong receptacles with a 15-amp circuit breaker. *Part #G1313*	This kit is used to install a panel conversion base kit on an Action OfficeSeries1 panel. It includes a custom pry bar an aluminum drill fixture with steel bushing, a drill fixture clamp and guide ins. This kit is reusable Part # A1919
Electrical Distribution, Multi-Outlet	Cable Port Outlet Strip
This electrical distributor attaches to an Action Office or Prospects panel suspended cable management trough, or an Ethospace or 5000 Series cable management trough. It also fits in the stretcher on an Arrio work surface. It provides additional receptacles with a15-amp circuit breaker.Part #NP289	This putty-colored multi-outlet strip mounts under a work surface with cable port. It provides additional outlets and manages cables beneath the work surface. This outlet has a 6' power cord. Part # NP358
Cable Management Assembly	Trim Cover, Expanded
This assembly provides an enclosed cable management raceway at the base of a panel, it includes a base plate, 2 side covers, and a side2 cover fillers Part #A0380	This trim cover conceals floor power entries or excess cable connections. Part #A0360
Trim Cover Connector	Trim Cover Finished End
This trim cover provides an enclosed cable management raceway at the base of panels connected by a 2-,3- or 4-way 90 connector or spacer. Part # A0362	This cover finishes the end of the last panel in a run of powered panels. Part #A0363
Vertical Cable Manager	Ceiling Telecommunication Entry
This cable manager provides a vertical cable management raceway at a panel connection. The package contains and expanded filler and 12" and 24" long cableways with mounting clips. Part #A0384	This Telecommunication entry routes voice/data cables internally from the ceiling to the base of the last panel in a panel run. It holds up to 8 25-pair cables and has a 10-1/2' pole which can be field cut to the appropriate length; ceiling and base trim ;and panel attachment hardware. The Telecommunication entry cannot be uses for the electrical connections. Part #A0332
Cable Management Trough, Panel Suspended	Cable Management Trough, Horizontal/Vertical
This black trough attaches to a panel to hold a 4-outlet electrical distributor and to manage cables. It can be field modified for use with any size panel. Attachment hardware included. Part #A0381	This trough is backed with pressure-sensitive tape and attaches horizontally or vertically to a panel or wall to manage cables. Part #A0383
Hard-Surfaced Panel	Cable Port
This structural panel has enameled surfaces, a painted top-cap, cable management side covers, and adjustable glides. Part # A1110	This cable port is for filed modified Action Office or Prospects work surfaces. It provides a hinged access for cable pass through. Part #NP360